pro-kit-open-cm-20
pro-kit-open-cm-20
pro-kit-closed
pro-kit-closed

dm-rta PRO KIT

REAL TIMe ANALYZER AND MULTI-TEST TOOL KIT

$965.00

Order now!

The DM-RTA Pro Kit includes everything you need for a complete mobile audio measurement solution. Nestled snuggly in the fetching blue hard case, you will find a DM-RTA, AC power supply, the CM-20 measurement microphone, all of the required interconnects, and custom test leads for line-level and speaker-level measurements. Included also is the AC-BT24 Bluetooth Streamer/Programmer, which allows you to connect to the DM-RTA using your tablet or phone.

included in kit

  • DM-RTA Real Time Analyzer
  • 110V AC power supply/charging adapter
  • USB A to B cable
  • USB A to A cable
  • AC-BT24 Bluetooth® Streamer & Programmer
  • CM-20 measurement microphone
  • XLR microphone cable
  • Speaker input to spring-loaded test leads cable
  • RCA input to spring-loaded test leads cable
  • AudioControl tuning pick (looks a lot like a guitar pick)
  • Blue hard case with laser-cut foam

AudioControl offers a wide range of professional measurement and instrumentation microphones which will make a perfect addition to your DM-RTA tool kit for making accurate acoustical measurements. For an entry-level measurement microphone, choose the CM-10, a long time standard issue microphone for AudioControl’s legendary SA-3052 analyzers. If you’re looking for a slightly better frequency response, look no further than the CM-20. The high-precision Josephson C550H rounds off the top of the list for truly accurate readings and impeccable frequency response.

CM-10

CM-20

C550H

The DM-RTA’s microphone preamp will also support any standard measurement microphone, should you already have one in your tool kit. 48V phantom power can be activated from the DM-RTA app and microphone gain is variable so your microphone may be easily calibrated to the DM-RTA hardware.

SPECIFICATIONS

INPUTS

  • 1 x Balanced (Input Impedance 3.24kΩ)
  • 1 x Unbalanced (Input Impedance 3.24kΩ)
  • 1 x Microphone (Input Impedance 10kΩ)
  • 1 x Speaker Level (Input Impedance 16.24kΩ)
  • Max Low Level Input Voltage: 8 Vrms
  • Max High Level Input Voltage: 40 Vrms

OUTPUTS

  • 1 x Balanced (Output Impedance: 51Ω)
  • 1 x Unbalanced (Output Impedance: 51Ω)
  • 1 x Coax Digital (Output Impedance: 75Ω)
  • 1 x Toslink
  • 1 x USB
  • Max Output Voltage from Signal Generator: 5 Vrms / 7 V Peak

GENERAL

  • Power Supply:
  • Battery Life: ~5 Hours

WEIGHTS & DIMENSIONS

  • Dimensions: 8”W x 4.8”D x 2.4”H
  • Weight: 2.6lbs (1.2kg)

IN THE BOX: DM-RTA, USB Cable, Power Supply, Manual, Warranty

bluetooth

  • Version: 4.2
  • aptX HD Compatible
  • UART Interface

output

  • Dual Differential Class AB Output Stage

performance

  • Signal to Noise Ratio: 96 dB
  • Maximum Data Rate: 3 Mbps (typical 1.6 Mbps)
  • Operating Range: 10+ meters (depending on environment)

general

  • Power Requirements: Provided by Option Port

weights & dimensions

  • Dimensions: 1.4”L x 1.0”W x 0.5”H
  • Weight: 0.3 oz (9 g)

in the box: AC-BT24, Quick Start Card, Warranty

performance

  • Frequency Response: 20Hz – 20kHz, ±3 dB
  • Max SPL: 105 dB SPL
  • Connector: 3 pin XLR, pin 2 positive

in the box: CM-20 Microphone, XLR cable

WEIGHTS & DIMENSIONS

  • Dimensions: 16.5”W x 16”D x 7”H
  • Weight (with included product): 13.0 lbs. (5.9 kg)

DOWNLOADS

FULL LINE CATALOG

dm-rta app (pc)

dm-rta app (MAC)

LITERATURE

USER MANUAL

HAVE QUESTIONS ABOUT THIS PRODUCT? VISIT THE KNOWLEDGEBASE!