How to update firmware for the DM-608 / DM-810 processors and D-6.1200 / D-4.800 amplifiers. Please review the installation instructions before proceeding.
Note: The new firmware is installed by re-installing the DM Smart DSP software on your computer. Completely uninstall any current versions of the software before downloading and installing the new version. Also make sure your computer is connected to the AudioControl processor or DSP amp via the USB cable and that the processor or DSP amp is powered on before you start the software/firmware installation.
Here are links to instructions for installing the software/firmware for:
You can download the new firmware version via these links:
Once you install the new software/firmware then login to the processor and check the Firmware version in your unit by going to the HELP drop down menu and select ABOUT.
Instructions for connecting via the optional AC-BT24 Bluetooth module:
DM Smart DSP app
If you need additional assistance, please call our technical support at 425-775-8461. Monday to Friday 8am to 5pm PST.