Yes! There is a Lip Sync setting on the 16 channel Director amplifiers. The Lip Sync setting is only present on Zones 5 – 8. Control is from 0 – 19, in 5 ms increments for a total of 100 ms of delay.
Was this article helpful?
How to use the 12 volt trigger options on an Architect amplifier.
Bijou 600/Rialto 600: How to bypass the default turn on volume level
Can I turn on/off RS-232 control from the front panel of an AVR/M processor?
How to store a secure backup on the AVR-7/9 or Maestro M5/9
How to upload new firmware to the Director M series amplifiers
How to update the speaker profiles on your Director amplifier