Dirac Live

What is Dirac Live®?

Dirac Live® is a mixed-phase room correction technology used in cinemas, studios and luxury cars. It corrects not only the...

Dirac Live: Setup for X / XR series processors and receivers

NOTE: This tutorial was written with Dirac version 3.4.4. Later versions of Dirac might have slight variations to the process....

Dirac Live: Bass Control for X / XR series processors and receivers

The AudioControl Maestro X9 / X7 processors and Concert XR8 / XR6 / XR4 receivers are enabled with the Dirac...

My Maestro processor or Concert receiver is on the network, but Dirac cannot find it!

First, make sure that the CONTROL setting in the setup menu is set to IP. Even if you will ultimately...

Dirac Live: Setup for Maestro M5/M9 processors and AVR 7/9 receivers.

Initial Setup Make sure the AVR 7/9 or M5/9 is connected to the same network as your computer. It doesn’t...

Which mic calibration file do I use for Dirac?

Our AVR’s and M9 started shipping with a new microphone. It is an all in one piece, there is no...

Can I use a different calibration mic for Dirac?

Yes. As long as the microphone is connected  via USB when you launch Dirac. You would then select the Microphone...

Is the Dirac on/off command global, or per input?

The Dirac EQ on/off command is per input basis. You can disengage the Dirac EQ by pressing the “audio” button...

Dirac Setup Walk-Thru (Legacy – v1.2.5)

INITIAL SETUP Make sure your AVR 7/9 or Maestro M5/M9 is connected to the same network as your computer.  It...

Where to place the mic during Dirac Measurements

When you reach the measurement phase of Dirac, the software gives you a handful of listening positions to measure before...