APPLE iOS DIGITAL PREAMP/INTERFACE
A state of the art, Made for iPod, microphone preamp, iAI2 is the perfect companion for AudioTools and the Transfer Function module, for loudspeaker testing, and as a general-purpose audio tester. It also works with many iOS audio Apps, including Garageband, Skype, SignalScope, Mulit-Track Recorder, and more.
With the included USB cable, now you can use iAudioInterface2 with your favorite PC or Mac-based audio software.
**Microphone is not included with iAudioInterface2
- 48V Phantom-powered XLR microphone input, with up to 50dB of gain*
- Balanced line input for transfer function measurements
- Balanced line output for signal generation
- Toslink digital audio output, mirrors line out at full level, also supports Dolby Digital 5.1 AC3 and DTS ES 6.1 test signals (optional in AudioTools)
- Internal li-ion battery, draws no power from your device
- When charging with the included universal power external adapter, also charges your attached iOS device, including iPad.
- Digital audio link to iOS device for lowest noise, and best quality. Uses our own A/D converters and DAC with precision USB audio clock recovery.
- Compatible with Lightning iOS devices and Mac & PC computers using the included USB interface cable.
*Microphone is not included with iAudioInterface2
Available with 30 pin connector or Lightning connector
- Balanced ¼” TRS
- Input Range (TRS): -90dBu to +40dBu
- Input Impedance (TRS): 4kΩ balanced, 20kΩ unbalanced
- Microphone XLR
- Gain Range (Mic Input): 50dB
- Equivalent Input Noise (Mic Input): -112dBu A-weighted
- Input Impedance: 20kΩ
- Phantom Power: 48V
- Optical Toslink PCM Digital: 16 bit – 32k/44.1k/48k sample rate (iOS Limited)
- Balanced ¼” TRS
- Maximum Output Level (TRS): +12dBu
- Total Harmonic Distortion: < 0.005 % at 1kHz, -1dBFS
- Frequency Response: 20Hz-20kHz ±0.5dB
- Noise Floor to Clipping: -80dBu to +45dBu
- Input Power Supply: 10V – 18V DC at 1.5A, 5.5mm connector with 2.1mm pin, pin positive
WEIGHTS & DIMENSIONS
- Dimensions: 5.0″W x 2.75″D x 1.75″H
- Weight: 1.0lbs (0.5kg)
IN THE BOX: iAudioInterface2, 30 pin cable, Lightning cable, USB cable, Charger, Manual, Warranty