Architect Model 110

2 CHANNEL HIGH-CURRENT AMPLIFIER

Do you want superb sound quality while driving eight speakers from a two-channel distributed audio amplifier?  Do you want AudioControl legendary reliability and performance with amazing energy efficiency? Then the waiting is over as AudioControl introduces its new high powered, great sounding stereo power amplifier, the Architect Model 110. All of these are standard features of the new AudioControl Architect Model 110 amplifier as it will comfortably drive 8 speakers (stable into 2 ohms) and has an astonishingly low energy usage, meeting the new stringent Energy Star requirements.

The AudioControl Architect Model 110, is a unique two-channel amplifier specially optimized for multi-room needs. The Architect Model 110 also boasts the meticulous quality and bulletproof reliability for which AudioControl’s custom-install designs are widely known.

FEATURES

  • 240 watts per channel RMS output into 2 ohms
  • Bridged power of 410 watts
  • Ultra low current consumption of <1 watt at standby!
  • Dual speaker output terminals for each channel (optional 5-way binding posts)
  • Main plus Auxiliary inputs with Signal-Sense Turn-On
  • Stereo/Mono control
  • Cool blue front panel Status LED indicators
  • Signal present LED’s on speaker outputs
  • PFM Subsonic filter for speaker protection
  • AudioControl LightDrive protection circuit
  • Signal sensing inputs
  • Rack mountable front panel (Non-Rack option available)

SPECIFICATIONS

INPUTS

  • Inputs: 1 Stereo Main, 1 Stereo Aux
  • Input Maximum: 8V
  • Input Impedance: 15kΩ

OUTPUTS

  • Amplifier Channels: 2 (4 terminal blocks), optional 5-way binding posts
  • Power Output (8Ω): 60W per channel
  • Power Output (4Ω): 120W per channel
  • Power Output (2Ω): 240W per channel
  • Power Output (Bridged Mono): 410W
  • Minimum Speaker Load: 2Ω

PERFORMANCE

  • Damping Factor: >200
  • Total Harmonic Distortion: <0.9%
  • Signal to Noise: >105dB, A-wtd ref Full Output
  • Crosstalk: >80dB @ 1kHz

CONTROL

  • Remote Power Trigger: +12 VDC

GENERAL

  • Power Consumption (Standby): <1W
  • Power Consumption (Idle): 8W
  • Power Consumption (loud listening level): 30W
  • Power Consumption (maximum): 550W
  • BTU/Hour Heat Dissipation (Idle): 25
  • BTU/Hour Heat Dissipation (loud listening level): 200
  • BTU/Hour Heat Dissipation (maximum): 490
  • Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads

WEIGHTS & DIMENSIONS

  • Dimensions: 17”W x 12”D x 3.5”H (2U)
  • Weight: 19.0lbs (8.62kg)

IN THE BOX: Architect Model 110, Power Cord, Manual, Warranty

DOWNLOADS

FULL LINE CATALOG

 

LITERATURE

USER MANUAL

Pin It on Pinterest