1
2
3
Slider

ARCHITECT MODEL P2660

16 CHANNEL MULTI-ZONE HIGH-POWER AMPLIFIER

The Architect ‘P’ Series superbly complements AudioControl’s popular high-power Architect multi-zone amplifier series with an industry leading 100 Watts RMS per channel into 8 ohms, 200 watts per channel into 4 ohms; all channels driven.

The P2660 uses a cool running proprietary design, including AudioControl’s LightDriveTM anti-clipping protection and features input busing capability, output pass-thru, master 12V trigger in/out plus local 12V trigger inputs on all zones, signal sensing as well plus coax SPDIF inputs for digital sources.

Available in a robust black powder coat finish, the Architect Model P2660 is designed, engineered and manufactured at AudioControl’s manufacturing facilities located in Seattle, USA. The Architect ‘P’ series comes with AudioControl’s legendary 5-year warranty and is available exclusively to the residential custom install and pro audio markets through AudioControl authorized dealers.

Read the press release >

FEATURES

  • 16 Channels of High Power and AudioControl Performance
  • 100 watts per Channel at 8 Ohms (All Channels Driven)
  • 200 watts per Channel at 4 Ohms (All Channels Driven)
  • Bridgeable as an 8 channel amplifier at 400 watts
  • Low Standby Current Draw of Less Than 1 Watt
  • Compact Design Fits into 2 Rack Spaces
  • LightDriveTM Anti-Clipping Protection Circuitry
  • 12v Trigger Input and Output
  • 2 x Input Buses (Digital and Analog)
  • Local Zone Input Trigger
  • Signal-Sensing On All Channels
  • Input Busing and Level Controls
  • Mono-switch for Improved Bridging
  • Beefy Rack Mount Brackets Included
  • Five Year AudioControl Warranty

SPECIFICATIONS

INPUTS

  • Inputs: 8 Stereo Local Analog Inputs, 1 Stereo Bus Digital Input, 1 Stereo Bus Analog Input
  • Input Sensitivity: Variable 0-1 Vrms
  • Analog Input Sensitivity: 1 Vrms for full output; level at maximum

OUTPUTS

  • Amplifier Channels: 16
  • 1 Stereo Bus Analog Output
  • Power Output (8Ω): 100W per channel
  • Power Output (4Ω): 200W per channel
  • Power Output (Bridged Mono): 400W
  • Minimum Speaker Load: 4Ω

PERFORMANCE

  • Damping Factor: >300
  • Signal to Noise: >105 dB, (A-wtd, ref full output)
  • Crosstalk: >80 dB @ 1kHz
  • Gain: 30 dB
  • Analog Input Sensitiviy: 1 Vrms for full output, level at maximum
  • DAC Specifications: 32 – 96 kHz sample rate, 16/24 bit depth

CONTROL

  • Remote Power Trigger: +12 VDC or Dry Contact Closure, 2 x 1/8″ TS mono in/out

AC POWER REQUIREMENTS

  • Standby: 0.9W
  • Idle (main power on, all channels off): 42W
  • All channels active: 90W
  • All channels 1/8th rated power: 338W
  • Full power (20A residential service limited): 2400W
  • Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads

BTU/HR OUTPUT

  • Standby: 3.1 BTU/hr
  • Idle (main power on, all channels off): 144 BTU/hr
  • All channels active: 307 BTU/hr
  • All channels 1/8th rated power: 415 BTU/hr
  • Full power (20A residential service limited): 2124 BTU/hr

GENERAL

  • Power Consumption (Standby): 0.9W
  • Power Consumption (Idle): 42W
  • Power Consumption (All channels active): 90W
  • Power Consumption (1/8th rated power – loud): 338W
  • Power Consumption (Full power): 2400W
  • BTU/Hour Output (Standby): 3.1 BTU/hr
  • BTU/Hour Output (Idle): 144 BTU/hr
  • BTU/Hour Output (All channels active): 307 BTU/hr
  • BTU/Hour Output (1/8th rated power – loud): 415 BTU/hr
  • BTU/Hour Output (Full power): 2124 BTU/hr
  • Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads

WEIGHTS & DIMENSIONS

  • Dimensions: 19″ W (w/rack ears) 17” W (w/no rack ears) x 15.5” D x ” H 3.5″ (2U)
  • Weight: 20.5 lbs (9.3 kg)

IN THE BOX: Architect Model P2660, Speaker Connectors, Remote Connector, Power Cord, Manual, Warranty

DOWNLOADS

FULL LINE CATALOG

LITERATURE

USER MANUAL

Pin It on Pinterest