How do I send remote power to the BVR-25 from the Maestro M2e?
when you are not utilizing the "AV" RCA output jack on the BVR-25  to send composite video or a digital audio signal (Reference Pair 1 of the RJ-45 Pin Connection Drawing).  The following 3 steps will guide you through the process:
1.  Move the jumpers on the BVR-25, located beneath the RJ-45 jacks
2.  Push the "Remote Power" button on the rear of the Maestro M2e, located next to the RJ-45 output
3.  Connect the Cat-5 between the Maestro M2e and BVR-25
Note: Electing to send power over the Cat-5 will prohibit the BVR-25 from outputing a signal through the yellow RCA jack (labeled "AV" on the BVR-25).