by AudioControl | Oct 11, 2023
DM Smart DSP has had a major update to V2.03. This tutorial will help guide you through the new public release of the DM Smart application V2.03 improvements, with our very own Jeff...
by AudioControl | Aug 1, 2023
Channel 7/8 on the DM-810 has multiple sources it could get it’s signal from. Depending on what you have connected, and the status of those inputs will dictate which input the DM-810 will pay attention to. Specifically, how the analog 7/8 input works with both...
by AudioControl | Aug 1, 2023
When installing the DM Smart DSP software on a Windows computer, you might encounter an error message “attempting to load ftd2xx.dll” and “failed to load ftd2xx.dll”, even when the DSP is connected to the computer. Sometimes the drivers don’t install themselves...
by AudioControl | Aug 1, 2023
When setting up your DSP, you might start the software and see signals spiking on the RTA with no audio playing on the inputs. The following steps should easily correct the issue. Windows: Open the DM Smart DSP, connect to your device, and then click on Tools > Update...
